The Smart Switch will Control 2 Wood Working Machines
from 1 Hand Held Remote & has a 1000' Range!
Most shops have a variety
of machines that serve the entire working area throughout any given day, for example:
On the days that milling and finish sanding are on the agenda you might switch your
overhead air purifier or exhaust fan on and off many times. It is very handy to do this
with your Smart Switch System.
Our hand-held Multi Controller
has a second set of buttons to control other wood working machinery. You may wish to
control a second wood working machine -- like a dust collector, shop vac,
compressor, exhaust fan or other device, either 110vac or 220vac. The arrow buttons at the bottom of the controller are used to
control the speed of air filtration motors when used with Speed Control Module. RM1103
Don't order a complete kit for
controlling a second machine. Just order one of these Relay Modules and the
installation manual will show you how to set the recieving code (using the dials on the
front of the module) , to respond to the unused button on your hand held remote.
Please call us
if you have questions about this application.
(828) 524 6125
We guarantee
you to be completely satisfied with our system! |
|
 RM2202
220vac/20amp Relay
Module
 $38.95
|
|
RM1101
110vac/15amp Relay
Module
$38.95 |
|
