Fernbrook sells & provides technical support for X10 Pro & Powerhouse wireles remote control products for home automation and security. Call (828) 524 6125

Receivers	Dimmers	Switches	Appliance Modules	Chime
	Lamp Modules	Toggle Replacement	Receptacle Modules	Universal
	Single Receptacles	Inline Modules	HD Dimmer Modules

THE XPD SERIES DIMMER SWITCHES
	Single switch or 3 & 4 way master control for manual and remote switching with full dimming control of incandescent lights.	TOP
XPDI3	DIMMER, 120 VAC, 500W, 3-WAY, INDUCTIVE, IVORY & WHITE	$21.41
	Inductive Dimmer module for resistive or inductive lighting, low voltage lighting, low voltage loads and 4A motors.
XPD3	DIMMER, 3-WAY, 120 VAC, 500W, 5A, INDUCTIVE, IVORY & WHITE	$21.41
	SP Rocker style switch, Single switch or 3 & 4 way master control.
XPSS	3-WAY SLAVE, IVORY & WHITE Companion (Slave) switch for 3 & 4 way applications.	10.70
	Additional Info:
	Respond to "All Lights ON" Rated at 500 Watts incandescent Neutral required for Inductive Dimmer No feed through connectors White & Ivory covers included
THE XPS SERIES SWITCHES
	The XPS series offer single switch or 3 & 4 way master control of nondimming incandescent or fluorescent lighting as well as appliances. Available in the following variations:	TOP
XPS2	SWITCH, 208/250 VAC, 20A, D.P., W/O "ALL LIGHTS ON"	$32.13
	240V/20A For use with pumps, air conditioners and 2HP motors.
XPS3	SWITCH, 120 VAC, 20A, 3-WAY, IVORY, FEED THRU, IVORY & WHITE	$32.13
	120V/20A "On" & "Off" only, Rocker style switch for single switch or 3 & 4 way applications.
XPSS	3-WAY SLAVE, IVORY & WHITE	$10.70
	Companion (Slave) switch for 3 & 4 way applications.
	Additional Info:
	Responds to "All Lights ON" (XPS3 only) Neutral required for Inductive Dimmer XPS2 available in Ivory only White & Ivory covers included
APPLIANCE MODULES
		Back TOP
PAM01	APPLIANCE MODULE, 2-PIN POLARIZED WITH A.G.C.	$14.11
	2 Pin Appliance Module. Grounded 1/3HP, 15A, with AGC circuit for control of small fans, radios etc.
PAM02	APPLIANCE MODULE, 3-PIN GROUNDED WITH A.G.C.	$14.97
	3 Pin Appliance Module. Grounded 1/3HP, 15A, with AGC circuit for control of coffee maker, stereo, humidifiers etc.
PAM21	2-WAY APPLIANCE MODULE (2 PIN GROUNDED)	$30.19
	Two Way 2 Pin Appliance Module. Grounded 1/3HP, 15A, for control of small fans, radios etc.
PAM22	2-WAY APPLIANCE MODULE (3 PIN POLARIZED)	$31.26
	Two Way 3 Pin Appliance Module. Grounded 1/3HP, 15A, for control of coffee maker, stereo, humidifiers etc.
	Additional Info:
	Does not have intensity control Does not respond to "All Lights ON" Automatic Gain Control Available only in white Plug-in modules
HEAVY DUTY APPLIANCE MODULE
		Back TOP
PAM04	HEAVY DUTY 220V, 20A, APPLIANCE MODULE	$28.95
	For use with 2HP motors, pumps, air conditioners etc. 220V, 20A.
	Additional Info:
	Does not have intensity control Does not respond to "All Lights ON" Available only in white
TECH TIP	You may want to set the House Code on the PAM04 to a different house code than your everyday House Code. This way, an "ALL UNITS OFF" command to your house lighting will not disrupt power to the appliance plugged into the PAM04.	TECH TIP

PSM04 SCREW-IN LAMP MODULE
		Back TOP
PSM04	150 WATT SCREW-IN LAMP MODULE	$14.99
	"Non-dimming" lamp module rated at 150W incandescent and has the ability to memorize it's X10 address code directly from the power line.
	Additional Info:
	Respond to "All Lights ON"
TECH TIP	When teaching the address Codes to the PSM04, use a PHC01 Mini Controller or a PHC02 Maxi Controller for ease of programming. The PSM04 will hold it's address codes even after a power failure. They can only be changed by re-teaching the PSM04 the command code that you desire.	TECH TIP

LAMP MODULES
	These Lamp Modules offer convenient, plug-in control of incandescent lights. Intensity control is built into the module and will work even with basic incandescent lamps. The following variations are available:	Back TOP
PLM01	LAMP MODULE, 300W, 120VAC	$15.89
	Plug-in, incandescent dimmer with Automatic Gain Control.
PLM03	LAMP MODULE, 300W, 120VAC	$12.89
	Plug-in, incandescent dimmer without Automatic Gain Control.
PLM21	2-WAY LAMP MODULE	$30.19
	Plug-in, incandescent dimmer with "Soft Start/Resume Dim" and Two Way capabilities for feedback to the CK11A ActiveHome Interface.
	Additional Info:
	Responds to "All Lights ON" Rated at 300 Watts incandescent
STANDARD TOGGLE REPLACEMENT
	Standard toggle replacement for manual and remote switching with full intesity control (from an X10 PRO controller) of incandescent lighting.	Back TOP
PLW01	WALL SWITCH MODULE, add "I" for IVORY	$12.30
	Replaces standard light switch.
PLW02	3-WAY WALL SWITCH MODULE,add "I" for IVORY	$15.77
	For use in 3 Way applications, includes companion switch
PCW03	COMPANION SWITCH(WORKS WITH PLWO2 FOR 4-WAY)	$7.2
	Companion switch (works with PLW02 for 4-Way)
	Additional Info:
	Responds to "All Lights ON" Additional PCW03 Companion Switches sold separately Rated at 500 Watts incandescent White & Ivory available, Ivory specified by "I" suffix
RECEPTACLE MODULES
	Receptacle Modules offer remote control of various non-dimming appliances and can be used in place of plug-in Appliance Modules for a more professional look.	Back TOP
PA011	WALL RECEPTACLE MODULE WITH CUSTOM WALL PLATE	$28.95
	15A Duplex recptacle, top outlet is controlled. Available in White only.
XPR	RECEPTACLE, 120 VAC, 20A, DUPLEX	$28.95
	20A Duplex receptacle, both outlets are set to the same address.White & Ivory available, Ivory specified by "I" suffix.
	Additional Info:
	Does not respond to "All Lights ON"
SINGLE RECEPTACLE MODULE
	Receptacle Modules offer remote control of various non-dimming appliances and can be used in place of plug-in Appliance Modules for a more professional look.	Back TOP
XPR2	RECEPTACLE, 250 VAC, 20A, SINGLE	$32.95
	This module can be used for 20A 240V motors or pumps.
	Additional Info:
	Does not respond to "All Lights ON" No feed through connectors
INLINE RECEIVER MODULE
	In line modules that mount inside the light fixture or electrical box.	Back TOP
XPDF	DIMMER, FIXTURE, 300W, 120VAC	$21.41
	Works with resistive loads and offers intensity control (using an X10 PRO controller) of incandescent lights. Responds to "All Lights ON".
XPFM	FIXTURE MODULE, 120 VAC, 20A	$21.41
	Works with inductive loads. Switches 120VAC via relay for unlimited nondimming 15A usage.
	Additional Info:
	XPDF 300 Watts XPFM 120V/15A

PUM01 UNIVERSAL MODULE / PHH02 REMOTE CHIME
	Contact closure and beeper. Trips a device connected to the dry contact; rated at 24V DC. Optionally emits a notification beep. Commonly used to interface with drapery controls, sprinkler systems, garage door openers etc.	Back TOP
PUM01	UNIVERSAL MODULE (CONTACT CLOSURE+BEEPER)	$38.95
	Additional Info:
	Available only in white Plug-in Module Can be set for momentary or sustained contact closure
PHH02 REMOTE CHIME		Back TOP
PHH02	REMOTE CHIME (FOR USE WITH PHSO1)	$19.95
	Additional Info:
	Available only in white Plug-in Module

Controllers	Plug-In Controllers	Telephone Controllers	Mini Timers	TOP
	Wireless Remote Systems	Switch Box Transmitter	Dual Floodlight
	Occupancy Sensor	Wireless Wall Switches	Programmable Controller
	Macro Controller	Pro Home Controller	Home Controller Deluxe
	Irrigation Controller	Pool & Spa Controller	Digital Thermostat

PLUG-IN CONTROLLERS
	Convenient manual operation from desks, coffee tables or bedside etc. Each has the capacity for full intensity control and can also send out the "All Lights ON" or "All Units OFF" signals. Variations include
PHC01	MINI CONTROLLER 6 FUNCTION 8 UNIT CONTROLLER(WHITE)	$14.95
	Mini Controller. Controls up to 8 individual X10 addresses. Available in black or white; specify PHC01B for black.
PHC02	MAXI CONTROLLER 6 FUNCTION 16 UNIT CONTROLLER(WHITE ONLY)	$24.95
	Maxi Controller. Controls up to 16 individual X10 addresses. "Group" feature allows simultaneous control of multiple addresses. Black only.
PHC03	SUNDOWNER WITH DUSK TO DAWN CONTROL	$16.95
	Sundowner. Similar to the PHC01 Mini Controller, but with a built in photo cell for dusk to dawn control of 4 sequential X10 addresses. Black only.
AUTOMATION CONTROLLERS
	Allow dial in, touch tone control of X10 devices. Both units can optionally flash a specific light, or group of lights when the telephone rings.	Back TOP
PHC05	TELEPHONE RESPONDER (TOUCH-TONE COMPATIBLE)	$58.89
	Works with answering machines. Controls up to 10 devices from a remote phone. Security code for dial in access.
MINI TIMER
	Store 2 "ON" and 2 "OFF" times daily for 4 sequential X10 addresses. Manual remote operation of 8 modules including intesity control and "All Lights ON / All Units OFF" feature.	Back TOP
PHT02	MINI TIMER (WHITE)	$48.50
	Additional Info:
	Optional buzzer can be set to activate when device number 1 turns on. Have the lights come on in conjunction with the built-in wake up alarm. Used in conjunction with PHC03 Sundowner, can simulate lived-in look. Turn on up to 4 lights at dusk, turn them off around bedtime.
WIRELESS REMOTE CONTROL SYSTEMS
	PHK05 Wireless Remote Control System. PHR03 Operates 16 modules via RF & powerline transmission. PHR04 operates 2 modules. The hand held remote sends an RF signal to the base transceiver, which in turn converts the signal onto the powerline.	Back TOP
PHK05	WIRELESS REMOTE SYSTEM / HAND HELD 8 CHANNEL REMOTE	$36.95
	16 channel wireless remote control system(PAT01 + PHR03).
PHR03	SIXTEEN PLUS WIRELESS REMOTE / 16 CHANNEL	$22.79
	Additional 16 channel hand held remotes available separately.
		Back TOP
PAT01	TRANSCEIVER (WHITE)-16 CHANNEL	.84$28.95
	RF base transceiver. Converts RF commands to X10 powerline signals.
		Back TOP
PHR04	TWO PLUS KEY CHAIN WIRELESS REMOTE CONTROL	$28.95
	Additional 2 channel hand held remotes available separately.
DUAL FLOODLIGHT MOTION DETECTOR
	Primarily acts as dusk or motion sensor. However, the device is also capable of sending "ON" and "OFF" commands to four devices when it senses motion and four separate devices when it senses dusk.	Back TOP
PHS01	DUAL FLOODLIGHT MOTION DETECTOR / REMOTE LIGHT CONTROL	$46.78
	Additional Info:
	Controlled addresses are sequential starting after unit's address Use with PHH02 Chime for advance notice of someone's approach
MOTION SENSORS
	Wireless Motion Detectors.	Back TOP
PMS02	Occupancy Sensor (WHITE / measures 2 1/2" X 2 1/2")	$26.89
PMS04	Outdoor Occupancy Sensor (Same as above but Dark Gray)	$32.89
	This wireless device sends an X10 PRO "ON" signal when it detects motion and an "OFF" signal after not detecting motion at programmable times up to 4 hours. It also sends an "ON" signal to the next sequential address when it detects "dusk" and an "OFF" signal when it detects "dawn". NOTE: The motion sensor sends signals when the dusk sensor is indicating a "dusk" condition. Requires 2 "AAA" batteries and an X10 PRO Base Transceiver (PAT01). Programmable for sensing day and night.
DM10A	WIRELESS OUTDOOR PIR DETECTOR	$28.99
	Outdoor Motion Detector. Battery operated wireless outdoor motion detector sends an RF signal to a PAT01 base transceiver, turning on X10 PRO light modules when triggered by motion. Can also be used to turn lights on at dusk and off at dawn. Only sends "On" command from motion, no "OFF" is sent.
WIRELESS WALL SWITCHES
	Single switch or 3 & 4 way master control for manual and remote switching with full dimming control of incandescent lights or other X10 modules connected to a load.	Back TOP
PHW04D	SLIM RF WALL TRANSMITTER 3 CHANNEL PLUS DIM (White)	$22.89
	Additional Info:
	Great for adding control of a switch, without pulling new wires.
	Wireless Wall Switch. Operates three X10 PRO modules by transmitting an RF signal to an X10 PRO Base Transceiver (PAT01). Fourth button is intensity control for the last device operated. Mounts simply and easily with self-adhesive tape or screws. Battery included.
PHW04D-G	SLIM RF WALL TRANSMITTER 3 CHANNEL PLUS DIM (GOLD) No Longer Available!
TECH TIP	Did you know that the trigger for a macro can also be a module's Unit Code? This way you can identify a room scene by remembering the Code of a particular lamp. When you turn that lamp's Code "ON", a Macro Trigger is also initiated.	TECH TIP

Keypads	Wall Transmitter/Keypads	1 & 2 Button Keypads	4 Button Keypads	TOP
	Switch Box Transmitter Base

WALL TRANSMITTER / KEYPADS

XPT1	BASE, WALL/BOX TRANSMITTER, 120 VAC/1 Button Keypad	$24.27
	A matched set Wall Transmitter and 1 Button Keypad used to transmit directly over the power lines. The Keypad allows one Unit ON and one Unit OFF directly from the button. Other various combination Keypad covers sold separately.
XPT4	BASE, WALL/BOX TRANSMITTER, 120 VAC/4 Button Keypad	$24.27
	Same as above, but with the direct control of 4 sequential X10 Commands available.
	Additional Info:
	These 2 most popular configurations are sold in White only.
1 & 2 BUTTON KEYPADS
		Back TOP
XP1	BASE, WALL/BOX TRANSMITTER, 120 VAC/1 Button Keypad	$24.27
	Allows ON/OFF control of 1 device or group of devices.
XP1A	1 BUTTON KEYPAD, ALL ON/ALL OFF	$10.70
	Allows ON/OFF control for ALL LIGHTS ON/ ALL UNITS OFF for devices on current house code.
XP2	2 BUTTON KEYPAD, 2 ON/OFF, 3 sequenced codes	$10.70
	Allows ON/OFF control of 2 devices or groups of devices.
XP2D	2 BUTTON KEYPAD, 1 ON/OFF, 1 DIM CONTROL	$10.70
	Allows ON'OFF control of 1 device plus intensity control.
	Additional Info:
	Available in white or ivory "Group" of devices refers to multiple X10 PRO modules set to the same "House" code and "Unit" address. In order to respond to intensity control commands, the device must be connected to an X10 PRO module capable of interpreting those commands (ie: XPD) and must be a device capable of being dimmed.
4 BUTTON KEYPADS
		Back TOP
XP4	4 BUTTON KEYPAD, 4 ON/OFF, 4 SEQUENCED CODES	$10.70
	Allows ON/OFF control of 4 devices or groups of devices.
XP4D	4 BUTTON KEYPAD, 3 ON/OFF, 3 SEQUENCED CODES, 1 DIM CONTROL	$10.70
	Allows ON/OFF control plus intensity control of 3 devices or groups of devices.
XP4A	4 BUTTON KEYPAD, 3 ON/OFF, 3 SEQUENCED CODES, 1 "ALL ON/ALL OFF"	$10.70
	Allows ON/OFF control of 3 devices or groups of devices, as well as ALL LIGHTS ON/ALL UNITS OFF control of all devices on the current house code.
	Additional Info:
	Available in white or ivory In order to respond to intensity control commands, the device must be connected to an X10 PRO module capable of interpreting those commands (ie: XPD) and must be a device capable of being dimmed.
SWITCH BOX TRANSMITTER BASE
	For use with all X10 PRO Keypoads. Each controls up to 4 sequential X10 addresses.	Back TOP
XPT	BASE, WALL/BOX TRANSMITTER, 120 VAC	$21.41
	Standard Transmitter Base fits inside a single gang box and wires directly to Hot and Neutral. Used with XP Keypads.
TECH TIP	Use the XPT with an XP2 Keypad to send control to an XPDF (Fixture Dimmer) and an XPFM (Fixture Module) attached to the split loads of a ceiling fan light and motor. Now you have independent control of the fan from the lights.	TECH TIP

Home Entertainment	Universal Learning Remote	Powermid	Infrared Command Console	TOP
	Video Sender	Color A/V Camera


	*If you are planning a project call us at (828)524 6125 !*
	*Enter Keywords or Part Number*
*Contractor Sales Counter*

PUR09 UNIVERSAL LEARNING REMOTE
The Universal 5-in-1 Learning Remote controls TV, VCR, Cable, and Satellite in a convenient and uncluttered design. It also includes Home Control when used in conjunction with the X10 Transceiver (or any X10 security system base receiver), allowing it to be used to switch and dim lighting in a home theater application for example. The learning function ensures that the remote will work with any audio/video product, no matter how obscure. It even allows operation of IR controlled air conditioning and drapery controls, for example. Teaching the remote a new set of codes is performed by placing the two remotes so that they face each other and pressing the key sequence to initiate programming. Each key on the original remote is then pressed in sequence followed by its corresponding key on the Universal 5-in-1 Learning Remote.
$28.56 PUR09	Extensive library includes codes for most TVs, VCRs, Satellite, and cable boxes etc. Easy to setup - just look up the code for the TV, VCR etc. and enter it into the remote using a simple key sequence. Learn the codes from obscure "old" audio/video remotes.
TECH TIP	The PUR09 has the ability to transmit radio frequency (RF) X10 Commands to a Base Transceiver (PAT01) or infrared (IR) commands to an Infrared Console IR543 when radio interference is prohibitive.	TECH TIP

POWERMID IR EXTENDER SET
	Allows multi-room control of A/V devices. The Transmitter (PEX02) converts IR signals from your existing remote to RF. The Receiver (PEX03) converts the signals back to IR. An IR Extender cord (PEX04) cand be used to better locate the Receiver. Transmitters, Receivers and Externder cords can be ordered separately.	Back TOP
PEX01	POWERMID I.R. REMOTE COTROL EXTENDER (PEXO2+PEXO3)	$43.70
PEX02	POWERMID INFRARED SENSOR/WIRELESS TRANSMITTER	$29.13
PEX03	POWERMID WIRELESS RECEIVER/INFRARED EMITTER	$29.13
PEX04	POWERMID INFRARED EXTENDER (FOR USE WITH PEX03)	$10.91
TECH TIP	Use the Powermid Kit to send IR commands to another room controlling your A/V equipment and the RVK35 Video Sender Kit to rreturn audio and video back to the remote room completely wireless.	TECH TIP

MINI INFRARED COMMAND CONSOLE
	Lets you use an infrared remote controller capable of transmitting up to sixteen X10 IR commands to turn on lights and appliances connected to X10 modules. It also includes buttons to control up to eight X10 products directly from the console, including "All Lights ON/All Units OFF" and intensity control of incandescent lighting.	Back TOP
IR543	INFRARED RECEIVER (10 COMMAND CAPABLE)	1600$22.86
TECH TIP	Did you know that the IR543 can be used with OEM learning theater remotes to control X10 Lighting and Appliance Modules right from the same remote used to control the home theater?	TECH TIP

RVK35 VIDEO SENDER
	Allows multi room audio/video by converting A/V signals to 2.4 GHz for high quality transmission. Includes Video Sender and Video Receiver.	Back TOP
RVK35	VIDEO SENDER KIT(1 TRANSMITTER & 1 RECEIVER 2.4GHz)	$107.13
XSC17	COLOR CAMERA WITH AUDIO (60FT. CORD & POWER SUPPLY)	$78.57
	Includes 60 ft. adapter cable and power supply. Can be used independent or extended with RVK35 video sender to send audio and video to the monitor of your choice.
	Additional Info:
	If the audio/video signal originates from a DSS box, then remote control of the DSS box may be possible.

Security Accessories	Security Console	PR02000 Value Pack	Voice Dial Security	TOP
	Personal Assistance Dialer	Magnetic Switch	Motion Sensor
	Security Remote Controllers	PowerHorn Sirens	Smart Repeater

SECURITY CONSOLE
	Wireless supervised 16 zone console. 4 + 2 digital communications format for central station monitoring.	TOP
PRO2000	16 ZONE WIRELESS WALL MOUNT SECURITY SYSTEM	$107.14
	Features:
	Line seizure Optional silent alarm Alarm status indication 16 zone capability RF control Built in automation features PC programmable, optionally from a remote location
PRO2000 VALUE PACK
	Capable of up to 16 sensors and 16 remotes. Built in automation will activate up to 5 separate device addresses, however X10 PRO Automation Controllers can be added to activate up to 256 devices. Will also work with PPR01.	Back TOP
PRO2000VP	16 ZONE WIRELESS WALL MOUNT SYSTEM (7 PIECE KIT)	$214.29
	Includes:
	2 Sensors for use with doors or windows 1 PIR motion sensor 1 Hand held remote 1 keychain remote 1 Lamp Module
VOICE DIAL SECURITY
	Main console emits alarm, dials up to 4 pre-programmed numbers, plays recorded message on connection and flashes all X10 PRO controlled lights on & off. Triggers the PSH01 & PSH02 PowerHorns. The person answering the call can listen in by pressing "0" on a touch tone phone.	Back TOP
DS7000	7 PIECE VOICE DIALER SYSTEM	$182.13
	Includes:
	Main Console 2 Sensors for use with doors or windows 1 PIR motion sensor 1 Master remote 1 keychain remote 1 Lamp Module
PERSONAL ASSISTANCE VOICE DIALER
	Main console emits alarm, begins dialing up to 4 pre-programmed numbers and flashes all X10 PRO controlled lights on and off. The person answering the call can listen in by pressing "0" on a touch tone phone.	Back TOP
PPC01	PERSONAL ASSISTANCE SYSTEM WITH PENDANT	$91.06
PPR01	HEART SHAPED CALL PENDANT Call pendant is available separately for additional family members.	$18.20
DOOR/WINDOW SWITCH & MOTION DETECTOR
	These wireless sensors can be used with the PRO2000 & PSV067 Security Systems.	Back TOP
PDS01	WIRELESS DOOR/WINDOW SENSOR (WHITE) For doors or windows. Sends RF signal to main console of X10 PRO security systems. Includes one magnetic read switch. Requires 2 AA batteries.	13.$19.99
PMS01	WIRELESS MOTION SENSOR (WHITE) PIR Wireless Motion Detector sends RF transmission to main console of X10 PRO Security Systems. Built in sensitivity switch for single or double catch mode. Comes with mounting bracket. Requires 4 AA batteries.	$39.93
SECURITY REMOTES
	These Hand Held Remotes can be used with the PRO2000 & PSV067 Security Systems.	Back TOP
PSR01	SECURITY/HOME AUTOMATION REMOTE Hand Held Remote. Features Arm in the "Home" or "Away" mode, "Panic" button, "Delay" entry options, "Security Light" remote control and remote operation of 4 other X10 PRO controlled devices.	$18.20
PKR02	SECURITY KEY FOB REMOTE CONTROL Key chain Remote. Features Arm and Disarm buttons, "Panic" option and remote operation of 1 X10 PRO controlled devece, ie: Security light, or thermostat set back etc.	$18.20
POWERHORN SIRENS
	These Sirens respond to flashmode powerline signals from X10 PRO Security Consoles. Can be used with the PRO2000 & PSV067 Security Systems.	Back TOP
PSH01	POWERHORN REMOTE / 110 DECIBEL 110 db siren for X10 PRO Security Systems. Tripped by flashmode powerline signals from the main console. Plug in a few of them throughout the job site!	$34.27
PSH02	SMALL POWERHORN SIREN 105 db siren for X10 PRO Security Systems. Tripped by flashmode powerline signals from the main console. Plug in a few of them throughout the job site!	$21.41

Couplers/Filters & Accessories	Phase Couplers	Filters & Couplers	Noise Filter/Signal Analyzer	TOP
	Test Equipment

PHASE COUPLERS
	For professional, reliable systems, either of the following phase couplers are recommended for every X10 PRO installation.
XPCP	PASSIVE COUPLING DEVICE 120/277VAC	$32.86
	Passive Coupler. 1:1 ratio. Installs at the electrical panel to couple both phases of the 240V circuit.	$32.86
XPCR	COUPLER/REPEATER, 240 VAC, CONSTANT OUTPUT AMPLITUDE SPLIT Coupler/Repeater. Installs at the electrical panel to couple, amplify and repeat X10 command signals on split and 3 phase panels.	$127.14
	Additional Info:
	Recommended in situations where the residence is over 3000 square feet and/or the transformer "feeding" power to the house is over 100' away.
FILTERS & COUPLERS
	For isolating electrical appliances that generate noise pollution on the power line and occasional load attenuation, preventing X10 command signals from "getting through".	Back TOP
PZZ01	PASSIVE BLOCKING FILTER, 277 VAC, 200 AMP	$42.86
	250A Coupler/Blocking Filter. Installs at the electrical panel to couple up to three phases. Attenuates X10 command signals from entering or leaving the building.
XPNR	IN-LINE NOISE REDUCER Noise Reducer. Wires in at the branch circuit or at the line leads of the affected module to help solve "Hard-to find" or intermittent noise issues.	$24.27
	Additional Info:
	These devices CAN be retrofitted
NOISE FILTERS / SIGNAL ANALYZER
		Back TOP
XPF	FILTER, 120 VAC, 3 WIRE, LOW PASS	$60.00
	3 wire noise filter for installation at the fixture or electrical panel (20A).
XPPF	FILTER, 120 VAC, PLUG IN MODULE Plug-in noise filter for isolating a specific appliance (5A).	$19.99
TEST EQUIPMENT
	Test Equipment for signal strength or noise levels. These devices exist to help installers test the design and setup of any X10 system for reliability.	Back TOP
XPTT	120/277 VAC SIGNAL TEST TRANSMITTER	$90.00
	Sends a continuous X10 command signal transmission from the location where it is plugged in.
XPTR	SIGNAL STRENGTH INDICATOR Measures and indicates the remaining strength of X10 command signals throughout the home.	$164.29
	Additional Info:
	These devices simply plug-in and are recommended for testing ALL X10 PRO installations. These devices are a must for the serious systems integrator.

Interfaces	5 Piece Computer Interface	Computer Interface	Powerflash Module	TOP
	Powerline Interfaces

5 PIECE COMPUTER INTERFACE
		Back
CK11A	UNIVERSAL COMPUTER INTERFACE KIT	$69.99
	This device connects to the serial port of a home PC to enable it to control the operation of any X10 automation system. It is NOT essential that the PC remain "ON". All information and settings are downloaded to the interface. Program your lights and appliances to operate automatically in conjunction with your weekly schedule, or have them respond to your commands from a universal hand held remote (included).
	Additional Info:
	Includes CM11A computer interface, UR19A universal 6-in 1 remote with built in control for lights and appliances, KC674 keychain remote, LM465 Lamp Module and RR501 Transceiver Appliance Module. CM11A interface sold separately, independent of kit; with cable and software.
COMPUTER INTERFACE
		Back TOP
CM11A	2-WAY UNIVERSAL COMPUTER INTERFACE, CABLE & SOFTWARE	$42.79
	Computer interface, cable and software. These devices connect to the serial port of a home PC to enable it to control the operation of any X10 automation system. It is NOT essential that the PC remain "ON". All information and settings are downloaded to the interface.
TECH TIP	Did you know that it is not necessary to leave a computer connected to the Interface? You can download all the data from a laptop computer to the Interface Module and leave it on site to operate autonomously.	TECH TIP

POWERFLASH SECURITY INTERFACE
	This device connects to a dry contact such as the external connectors on an existing wired in security system and transmits 1 of 3 signals when tripped.	Back TOP
PSC01	POWERFLASH BURGLAR ALARM INTERFACE	$21.59
	Mode 1: Turns all X10 controlled lights ON along with 1 appliance
	Mode 2: Flashes X10 controlled lights ON and OFF
	Mode 3: Turns 1 selected X10 address ON and OFF
	Input A: 6-18VAC/DC or audio
	Input B: Dry contact clusure

TECH TIP	Add lighting control to an existing alarm panel that previously had no automation features. Connect the PSC01 to a bell output or a contact closure to control a PLW01 (Wall Switch) or any other X10 Module.	TECH TIP

POWERLINE INTERFACES
	Connects via RJ11 to the X10 output of another manfacturer's device (cable not included) and converts signals from the device onto the powerline. The PSC05 also reports X10 transmissions on the powerline back to the device.	Back TOP
PSC04	POWERLINE INTERFACE	$13.70
PSC05	2-WAY POWERLINE INTERFACE	$20.56
	Additional Info:
	PSC04 - 1 way interface, PSC05 - 2 way interface An X10 command signal booklet is available on request ("Tech Note") No cable is supplied due to the wide variety of connection options inherent in these devices.