Wireless Remote Controllers for X10 wireles remote control products for home automation and home security easily installed by the homeowner. Call (828) 524 6125

	Wireless Controllers Call us! 828 524 6125
	Enter Keywords or Model Number

Appliance Modules

Wireless Wall Switches

Remote Wall Switches

Timers & Motion Detectors

Use wireless remote controllers to control any X10 reciever. For example, lamp and appliance modules, wall switches -- also Universal & Chime modules.

Note: Call for more information on rating and applications.

Wirless Remote Control

RC5000 Wireless Remote System

Transceiver Module

Wireless Remote Control/Transceiver system will control from inside or outside your home any light or appliance plugged into it. Will also dim and brighten lights connected to Wall Switch modules and Lamp Modules. Controls up to 16 separate Modules.

$31.50

Transceiver Module converts RF signals from any of our wireless transmitters to your house wiring. Controls up to 16 separate Modules per letter code.

$28.95

Hand Held Remote Controllers

HR12A 16 Plus Keychain Remote

KR19A 2 Channel Keychain Remote

16 Channel Wireless Remote Control. Switch porch, hallway or floodlights when leaving or returning to your home. Can be used with ActiveHome 2-way computer interface to create Macros.

$17.41

TWO PLUS Key Chain Wireless Remote Control. Switch porch, hallway or floodlights when leaving or returning to your home. 2 channels - can be used with ActiveHome 2-way computer interface to create 4 Macros.

$28.95

Special Controllers

TH2808 Thermostat Setback Controller

MS14A Outdoor Motion Detector

The TH2808 allows you to simply and effectively control your home, cottage, shop or office control forced air heating & air conditioning system. Used with an X-10 Appliance Module, and an X-10 timer, or telephone responder, the TH2808 allows for up to 15 degrees of set-back temperature control.

$14.56

Outdoor Motion Detector. This small weather proof sensor (2 1/2"X2 1/2") will turn lights on autamatically when motion is detected ourdoors or it will cause a chime or beeper to alert you when someone enters its detection area.

$25.20

Special Controllers

SS13A Wireless Wall Switch

DM10A Outdoor Motion Detector

Wireless Wall Switch. Operates 3 X-10 modules by transmitting an RF signal to an X-10 Base Transceiver (ie: TM751 or RR501) Fourth button is intensity control for the last device operated. Mounts simply and easily with self-adhesive tape. Battery included.

$18.57

Outdoor Motion Detector * -- This wireless outdoor motion detector will tell PK9 (ReX-10 Barking Dog Alarm below) to bark whenever someone moves outside the house. This motion detector can also turn on lights or appliances (like a radio) automatically using a lamp or appliance module. Or the Motion Detector could make the PK9 bark, then 3 seconds later, the lights go on! A very realistic and "lived in" effect!

$28.95

Control These Modules With Your Wireless Controllers.

LM465 Lamp Module

am486.jpg (2393 bytes) The LM465 is rated for Incandescent lamps up to 300 Watts max. It can be turned on and off, and dimmed/ brightened remotely from any X-10 Controller or Timer.

$12.89

UM506 Universal Module

The Universal Module contains an isolated contact relay and a piezo sounder (beeper). It can be set to operate as a beeper only, as an isolated contact relay only, or both. The contacts are rated at 24VDC.

$38.95

AM15A Appliance Module

am486.jpg (2393 bytes) Two Way 3 Pin Plug-in Appliance Module for controlling various home appliances. Operated by X-10 controllers. Rated at 15 Amps, 1/3 HP, 500 Watts. You can identify its status when polled by ActiveHome software.

$31.26

AM486 2 pin Appliance Module

am486.jpg (2393 bytes) S110vac Applince Module/2 pin polarized. Responds to any X-10 controller. Rated at 15 amp resistive load.

$12.40