|
|
|
Use a Wireless Wall Switch to control any X10 reciever. For example,
lamp and appliance modules, wall switches -- also Universal & Chime modules. |
Note:
Call for more information on rating and applications. |
|
|
Wall Switch & Transceiver Module |
|
|
|
|
|
|
|
|
|
|
|
|
The LM465 is rated for Incandescent lamps up to 300 Watts max.
It can be turned on and off, and dimmed/ brightened remotely from any X-10 Controller or
Timer.
|
$12.89
 |
|
The Universal Module contains an isolated contact relay and a piezo
sounder (beeper). It can be set to operate as a beeper only, as an isolated contact relay
only, or both. The contacts are rated at 24VDC.
|
$38.95
 |
|
Two Way 3 Pin Plug-in
Appliance Module for controlling various home appliances. Operated by X-10
controllers. Rated at 15 Amps, 1/3 HP, 500 Watts. You can identify its status when
polled by ActiveHome software.
|
$31.26
 |
|
|
S110vac
Applince Module/2 pin polarized. Responds to any X-10 controller. Rated at 15 amp
resistive load.
|
$12.40
 |
|
|
A plug in Module for controlling 220vac appliances -- like water
heaters, room air conditioners, ranges, etc. Responds to all X-10 controllers.
|
$28.95
 |
|
|
110v Wall Receptacle Module with
custom wall plate. 15A Duplex recptacle, top outlet is controlled. Available in White
only.
|
$28.95
 |
|
|

Motion Detector/Light Sensor. Turns on the connected
floodlights either when motion is detected or when it gets dark. Turns on up to 4 X-10
Modules when motion is detected. Turns on up to 4 X-10 Modules at dusk and turns them off
again at dawn.Also respond to any wireless controller. |
$43.70
 |
|
|
|
|
|
|
![]() |