Store 2 "On" and 2 "Off" times daily for 4 sequential X10 addresses. Manual remote operation of 8 modules including intensity control and "All Lights On / All Units Off" feature.

Additional Info:
Optional buzzer can be set to activate when device number 1 turns on. Commonly used to have the lights come on in conjunction with the built-in wake up alarm

$48.50    

Computer interface, cable and software. These devices connect to the serial port of a home PC to enable it to control the operation of any X10 automation system. Does not require that the PC remain on -- all information and settings are downloaded to the interface.

$42.79    

Description: Works with any X10 RF transceiver including Active Home Upon detection the DM10A can trigger an X10 House Code, such as A1, which can turn on lights and appliances or be set to start an ActiveHome macro.

$28.95  

Outdoor Motion Detector. This small sensor (2 1/2"X2 1/2") Will turn lights on autamatically when motion is detected ourdoors or it will cause a chime or beeper to alert you when someone enters its detection area.

$25.20    

Transceiver Module converts RF signals from any of our wireless Motion Detectors to your house wiring.  Controls up to 16 separate Modules per letter code.

Note: All X10 wireles Motion Detectors need this module to interface with house wiring.

$28.95 

PR511

Motion Detector/Light Sensor. Turns on the connected floodlights either when motion is detected or when it gets dark. Turns on up to 4 X-10 Modules when motion is detected. Turns on up to 4 X-10 Modules at dusk and turns them off again at dawn.

$43.70