The Smart Switch will control your primary Dust
Collector plus a 2nd machine from 1 Hand Held Remote & has a 1000' range! (UL
& SA Approved)
Fine wood working takes
time. -- The Smart
Switch is a great time
saving accessory. It allows wood workers to switch dust collection systems remotely
whenever needed from any location in the shop. You simply press a button at your side.
Your dust collector, or any other wood working machine, can be located in a separate room
or even a separate building from the wood working area. Range is not an issue!
Our hand-held Multi Controller
has a second set of buttons to control other wood working machinery. You may wish to
extend our system to control a second machine -- like a dust collector, shop vac,
air compressor, exhaust fan or other device, either 110vac or 220vac. The arrow buttons at the bottom of the controller are used to
control the speed of air filtration motors when used with our Speed Control Module. RM1103
If you are a
wood worker with a central dust collection system --- the Smart Switch
is for you!
We guarantee
you to be completely satisfied with our system! |
|
* Heavy
Duty 2 Channel System
DK2202
220vac / 20amp Heavy Duty Switching System
 $68.95
* Heavy Duty 2 Channel
System
DK1101
110vac / 15amp Heavy Duty
Switching System
$58.95 |
|
* Heavy
Duty 2 Channel System
DK1102
110vac / 20amp Heavy Duty Switching System
$68.95
* Single channel system
DK1100
110vac / 15amp Wireless Switching
System
$44.95 |
|
